INSTALLATION INSTRUCTIONS FOR INSET (I) KITCHEN SINKS
VIDEO INSTALLATION INSTRUCTIONS FOR FLUSH MOUNT (F) KITCHEN SINKS
VIDEO INSTALLATION INSTRUCTIONS FOR FLAT MOUNT (S) KITCHEN SINKS
VIDEO INSTALLATION INSTRUCTIONS FOR UNDERMOUNT (U) KITCHEN SINKS
VIDEO INSTALLATION INSTRUCTIONS FOR SIT-ON KITCHEN SINKS VIDEO
CARE AND CLEANING :
After installation, the kitchen sink should be thoroughly cleaned from all the remains, especially iron drills, because the longer contact of such particles with the wet surface of the sink would cause rusty stains on the surface!
To clean ALVEUS kitchen sinks made of stainless steel (stainless steel CrNi 18/10), use soft cloths and household liquid cleaners.
Wash the daily stains and sediment with the clean water and then dry the sink with a soft and clean cloth. In this way we avoid the accumulation of limescale.
Stains (fruit juices, coffee, tea, ...) wipe immediately with a liquid detergent and a soft cloth and rinse with clean water.
Other stains (water colors, ink ...) wipe immediately with a cloth soaked in diluted alcohol and rinse with clean water.
For daily removing lime, you can use the vinegar which you leave on the surface for several minutes and rinse with clean water and then wipe the surface with a clean cloth. Use Alveus ALLSHINE for stubborn limescale.
Cleaning with rough abrasives and coarse sponges is prohibited, since it is possible to matt or rub the smooth surface of the kitchen sink.
Do not expose the kitchen sink to strong chemicals such as:
- acids and bases with more than 10% concentration
- cleaners that exceed 5% concentration of the active substance
- paint removers
- cleaners for ovens
If the kitchen sink comes into contact with any of the chemicals listed above, rinse the surface immediately with clean water. Do not place on the drainer or bottom of the kitchen sink a hot cookware that you took directly from the oven or from the hob (hot pans, cookware, dishes). When filling the boiling water into the kitchen sink, liquid cold water should also be running. Do not cut directly onto the dishwasher surface. All claims arising from non-compliance with these instructions are ineligible.
KITCHEN MIXER TAPS
INSTALLATION: When installing kitchen mixer tap, we advise you to use the service of professional installers, as the guarantee does not cover any damage caused by improper installation and repair. Before installing mixer tap all water pipes must be thoroughly rinsed. In order to avoid mechanical damage to mixer tap caused by dirt or coarse particles from the plumbing, it is necessary to attach a mixer tap to the Alveus angle valves filter.
CARE AND CLEANING : Use only soap and soft cloth for cleaning. Do not use abrasive or chemical cleaning agents, coarse cloths and sponges or steel wool. After use, dry the reinforcement with a soft cloth.